GP160 fiber optic terminal cabinet (fiber splitter distributing cabinet)

Product description

In uptown or commercial district ,fiber splitter distributing cabinet makes connect distributing fiber cable and inleting fiber cable that be led into by the end of fiber optical . fiber splitter distributing cabinet is layout on networking structure ,including outdoor and two indoor type . Assembling parts on striping and fixing fiber cables, splice module ,splitter module ,distributing module and storage area etc have solved kinds of performance as like fiber cable fixed ,fiber optical spliced and distributed ,splitter handled and so on .

It’s installed by wall-mounted or rod outdoor and passageway or well indoor .

Main Features
1. It’s reached IP65 class on grade of protection
2. It’s made of steel plate with high quality and sprayed painting on surface .
3. Front opening in order to fully operate .
4. With kinds of adapters as FC,SC,ST etc.
5. The requirement of splitter pigtailsdiameter 2mm or 3mm ,length 1m
6. It warrant fiber fixed ,protected and ground .
7. Inlet holes of trunk and branch fiber optic cables is enough and independent . The rubber-insulated fiber cable replaces branch fiber optic cables .
8. It's good design to protect the curvature radius of optical fiber

Technical Parameters
1. Ambient temperature-25℃～+40Relative humidity: 85% at 30℃
Atmospheric pressure70～106Kpa
2. optical propertyAfter operating additional fiber cables or FO trays ,there is no attenuation .
3. Insulation resistance2X104M
4. Voltage endurance: under 15KV(DC) voltage it shows no breakdown when flash-over in 1 min.

Product Directory：